Hackpad 封存器 - lass

LASS - Free try

最後編輯：2017-05-18 建立：2015-08-10 歷史紀錄

 

WUULONG SStatus

The current free try proposal is open for discussion. Once it get agreed and the devices is ready. We will open for try ASAP. Remind the detail of these rules may be adjusted.

 

We try to make our donations helpful for everyone. So we like to share the donations to all of our community.

 

One thing important is before you really make it, you may like to give it a try.

Here is the rules that you can get it. FOR FREE

 

Rule purpose

The purpose we make these rules and procedure here is just try to make the these limited devices from sponsors can be helpful for more peoples.

 

The LASS have rights to decide who get the priority by consider the contributions to the project.

 

With what reason you can try?

Anything, just make sure this try can help you. Please also make a promise that you like to support these LASS community. We help you, you feedback. Simple! Maybe start from say "Thank You"

 

Try rule

  1. In order to have higher utilization, you can try for 1 or 2 week.
  2. You have the responsibility to delivery to next one or send it back before trying period ( 1 or 2 week ). Find the next one in the request form.
  3. In principal, the receiver need to pay for the delivery.
  4. Please take care of it, if you accidentally break it. You need to pay to fix it.
  5. When you receive it, please check if it is broken before you proceed your work.
  6. To make it can be traceable, when you send it and receive it, please send a email to notice wuulong at gmail.com. Please let me know your mobile number in case we need to contact you.
  7. The delivery area currently only limit to Taiwan.
  8. You need to update your record in the request form to inform the community the status of the device.

 

What you can try?

MINGWEI CT0: Just LinkItONE

 

WUULONG ST1 : Basic device set ( include LinkItONE + LinkIt Connect 7681 )

  • We put LinkItONE set + Shield + Dust sensor into demo case. With predefined wifi password. You are expected to power it up and setup your wifi AP with predefined SSID/password. Then start to use it without making the device.

 

T2 : Starter Kit ( include Starter KIT for LinkItONE, Basic KIT for LinkITONE )

 

T3 : Realtek Ameba

 

T4 : Qblinks Qmote maker's module

 

T5 : GoWarrior TIGER

 

T6: ICSHOP donate sensors

 

T7: PocketGeiger 偵測游離輻射劑量 *1

 

T8: isPLC 1.0 主板含Code

 

T9 : SeeedStudio mbed（ARMmbed） Developer Kit

  • 板子連結： https://developer.mbed.org/platforms/Seeed-Arch-Link/

 

T10: ( mbed NXP LPC1768 + mbed Application Board ( for LCP1768 )) *4

  • https://developer.mbed.org/platforms/mbed-LPC1768/
  • https://developer.mbed.org/components/mbed-Application-Board/

 

T11 : Intel Quark Microcontroller Developer Kit D2000*3

 

T12 : BOSCH XDK The Sensor X-Perience *1

 

T13: ROHM Semiconductor - ROHM Sensor Shield *1 ( SENSORSHLD1-EVK-101)

 

T14: UnaShield RCZ4 *2

 

Current we have 2*T1 type devices. 1*T2 type device , 1*T3, 10*T4

All devices have ID( sequence number ).

 

*

 

Where is it now?

This table maintain the current location of these try devices

 

*

 

 

Request form - Want to try?

Before you apply the request form, it means you agree on all the rules and information in this page.

 

If most of the time, the device will be at outdoor and measuring the data, you can try it for 2 weeks. If you use it for development or any others, the try period is 1 week.

 

When you get or send out the devices, please also update the table "Where is it now?"

 

 

 

*

Contact information

MINGWEI 臉書

哈爸 臉書

PHILIPPE Lmiaoski miaoski@gmail.com

WUULONG SKzn :

    wuulong sheuNeed Kzn facebook contact information