Hackpad 封存器 - lass

研究筆記-LoPy

最後編輯：2017-01-02 建立：2016-12-28 歷史紀錄

 

WUULONG S緣起

聽說有個整合了 Wifi, Bluetooth, LoRa 的好東西，所以借來玩玩

 

Step by Step

  • Quick Start - LED color checked
  • GPIO check
  • Pymakr connected
  • Telnet connected (micro/python)
  • Boot with your code
  • Bluetooth ADV check OK

 

 

GPIO Checked

# sample code in the document seems have syntax error, following is good.

import machine

led=machine.Pin("GPIO12",machine.Pin.OUT)

led(1)

 

Boot with your code

Replace main.py in flash/

  • use ftp 192.168.4.1 to upload.
  • or add main.py to your project and sync project in PyMakr

 

network module don't have Bluetooth. Maybe need upgrade

 

Upgrade firmware

升級時，電源另外給 5v, 資料還是用 3.3v

FTDI TxD-P0(Rx0), FTDI RxD-P1(Tx0), FTDI GND-GND.

0.9.0.b network module don't have Bluetooth. 1.1.0.b1 have.

from 0.9.0.b to 1.1.0.b1

>>> import os

>>> print(os.uname().release)

1.1.0.b1

 

Check Bluetooth Adv

  • telnet and UART console hard to use code copy&paste to run python script.
  • use PyMakr, run script will be better

 

  • from network import Bluetooth
  • import binascii
  • bluetooth = Bluetooth()
  • bluetooth.start_scan(5)
  • while True:
  • adv = bluetooth.get_adv()
  • if adv:
  • # try to the the complete name
  • print(bluetooth.resolve_adv_data(adv.data, Bluetooth.ADV_NAME_CMPL))
  • # try to get the manufacturer data (Apple's iBeacon data is sent here)
  • #print(binascii.hexlify(bluetooth.resolve_adv_data(adv.data, Bluetooth.ADV_MANUFACTURER_DATA))

Output: CC2650 SensorTa.

 

Normal console output

  • ets Jun 8 2016 00:22:57
  • rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
  • configsip: 0, SPIWP:0x00
  • clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
  • mode:QIO, clock div:2
  • load:0x3fff9010,len:8
  • load:0x3fff9018,len:312
  • load:0x40078000,len:2352
  • load:0x4009f000,len:1196
  • entry 0x4009f2d8
  • frc2_timer_task_hdl:3ffd2634, prio:22, stack:2048
  • tcpip_task_hdlxxx : 3ffd7154, prio:18,stack:2048
  • pp_task_hdl : 3ffdb3c4, prio:23, stack:8192
  • mode : softAP(24:0a:c4:00:b4:ff)
  • dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)
  • dhcp server start:(ip: 192.168.4.1, mask: 255.255.255.0, gw: 192.168.4.1)

 

Try PyMate

  • By follow the setup procedure and in PyMate App (iOS), the setup devices always can't connected. The setup procedure run smoothly. But not working.

 

  • The /flash directory only have main.py, boot.py , Can't find any additional library and python file which I think there should be have some support files.

 

 

參考資料