LASS - App Lists
編輯歷史
| 時間 | 作者 | 版本 |
|---|---|---|
| 2017-02-22 06:25 – 08:00 | r3007 – r3561 | |
顯示 diff（274 行未修改）
*SENSOR_ID_HUMIDITY (s_h2)
*SENSOR_ID_GAS_CO2 (s_g8) => 已新加入 spec
- *Eㄧple:
+ *Example:
*
*ver_format=3|FAKE_GPS=1|app=LASS4U|ver_app=beta|device_id=LASS-FT2_002|date=2016-05-02|time=02:11:20|device=Ameba|gps_lon=120.993378|gps_lat=24.8005658|s_t2=27.s_h2=70.6|s_d2=22.0|s_d0=32.0|s_d1=48.0|s_g8=530.0
-
- LASS/Test/Rainfall-1
- *(APP_ID= APPTYPE_PUBLIC_BASE +14, APP_NAME=Rainfall-1)
- 負責人臉書: Jhih-Cyuan Shen
- *device=?
-
- *可感測:
- *感測器
- *
+ LASS/Test/ENSUF_Rainfall
+ *(APP_ID= APPTYPE_PUBLIC_BASE +14, APP_NAME=ENSUF_Rainfall)
+ *本專案是歐盟Smart Urban Futures (ENSUF) 資助的 FloodCitiSense 計畫。應用LASS架構的應用專案。計畫共同參與國家包含比利時、英國、荷蘭與台灣。整體計畫主要透過公民、地方政府、學術與私部門共同合作的方式。在都市區域針對降雨量進行即時觀測與分析，搭配淹水模式進行都市淹水的分析與評估。在降雨量監測資料傳遞與共享的方式，將依循LASS現有資料傳輸架構進行資料分享與應用。實際雨量監測站主要將應用在英國伯明罕與台灣。
+ 負責人臉書: Jhih-Cyuan Shen
+ *device=LinkIt ONE
+ *感測內容: 降雨量或降雨強度 （單位：mm or mm/hr）
+ *感測器 : 頃斗式雨量計（Tipping Bucket Rain Gauge）
+ * 自製3D列印或商品化之雨量計 http://iepas.net/ UCAR 商品化 商品化2 商品化3
*
- *資料欄位
+ 資料欄位
*s_p
- .x*S數值上 5位數含小數下2位數 value %5.2f*Example:
+ .x
+ *（ x為觀測時間的間隔，例如s_p0.1 1分鐘頻率之降雨量 , s_p0.2 2分鐘頻率之降雨量， s_p0.5 5分鐘頻率之降雨量。目前在降雨量觀測常用的時間間距 為1,2,5,1 ,15,6*分鐘
+ 。數值上 5位數含小數下2位數 value %5.2f* Sample:
*
- *vsample
- * 12:51:47|LASS/Test/Rainfall-1/FTR_XXX|ver_format=3|FAKE_GPS=0|app=Rainfall-1|ver_app=0.1|device_id=FTR_XXX|tick=678448|date=2016-02-14|time=04:51:46|device=?|s_p1=0.0|s_p2=0.0|s_p3=0.00|s_p4=0.0|s_p5=0.0|s_p6=0.0|gps_lat=24.482250|gps_lon=120.596191|gps_fix=0|gps_num=0|gps_alt=135*
+ *am1:51:47|LASS/Test/RaiENSUF_RainfallR_XXX|ver_format=3|FAKE_GPS=0|app=Rainfall-1|ver_app=0.1|device_id=FTR_XXX|tick=678448|date=2016-02-14|time=04:51:46|device=?|sLinkItONEp1=0.0|s_p2=0.0|s_p3=0500|s_p4=010|s_p5=0.15|s_p6=0.0|gps_lat=24.482250|gps_lon=120.596191|gps_fix=0|gps_num=0|gps_alt=135*
LASS/Test/Ignore
*(APP_ID= APPTYPE_PUBLIC_BASE +13 [Just reserved, don't need to be use ], APP_NAME=Ignore)
（1 行未修改）
|
||
| 2017-02-22 02:02 – 02:02 | r3005 – r3006 | |
顯示 diff（283 行未修改）
*device=?
- *可感測: 降ㄩ
+ *可感測:
*感測器
（12 行未修改）
|
||
| 2017-02-21 02:06 – 02:09 | r2990 – r3004 | |
顯示 diff（274 行未修改）
*SENSOR_ID_HUMIDITY (s_h2)
*SENSOR_ID_GAS_CO2 (s_g8) => 已新加入 spec
- *Example:
+ *Eㄧple:
*
- *ver_format=3|FAKE_GPS=1|app=LASS4U|ver_app=beta|device_id=LASS-FT2_002|date=2016-05-02|time=02:11:20|device=Ameba|gps_lon=120.993378|gps_lat=24.8005658|s_t2=27.8|s_h2=70.6|s_d2=22.0|s_d0=32.0|s_d1=48.0|s_g8=530.0
+ *ver_format=3|FAKE_GPS=1|app=LASS4U|ver_app=beta|device_id=LASS-FT2_002|date=2016-05-02|time=02:11:20|device=Ameba|gps_lon=120.993378|gps_lat=24.8005658|s_t2=27.s_h2=70.6|s_d2=22.0|s_d0=32.0|s_d1=48.0|s_g8=530.0
LASS/Test/Rainfall-1
（2 行未修改）
*device=?
- *可感測:
+ *可感測: 降ㄩ
*感測器
（12 行未修改）
|
||
| 2017-02-21 00:28 – 00:32 | r2918 – r2989 | |
顯示 diff（277 行未修改）
*
*ver_format=3|FAKE_GPS=1|app=LASS4U|ver_app=beta|device_id=LASS-FT2_002|date=2016-05-02|time=02:11:20|device=Ameba|gps_lon=120.993378|gps_lat=24.8005658|s_t2=27.8|s_h2=70.6|s_d2=22.0|s_d0=32.0|s_d1=48.0|s_g8=530.0
+
+ LASS/Test/Rainfall-1
+ *(APP_ID= APPTYPE_PUBLIC_BASE +14, APP_NAME=Rainfall-1)
+ 負責人臉書: Jhih-Cyuan Shen
+ *device=?
+
+ *可感測:
+
+ *感測器
+ *
+
+ *
+ *資料欄位
+ *s_p
+ .x*S數值上 5位數含小數下2位數 value %5.2f*Example:
*
+ *vsample
+ * 12:51:47|LASS/Test/Rainfall-1/FTR_XXX|ver_format=3|FAKE_GPS=0|app=Rainfall-1|ver_app=0.1|device_id=FTR_XXX|tick=678448|date=2016-02-14|time=04:51:46|device=?|s_p1=0.0|s_p2=0.0|s_p3=0.00|s_p4=0.0|s_p5=0.0|s_p6=0.0|gps_lat=24.482250|gps_lon=120.596191|gps_fix=0|gps_num=0|gps_alt=135*
LASS/Test/Ignore
*(APP_ID= APPTYPE_PUBLIC_BASE +13 [Just reserved, don't need to be use ], APP_NAME=Ignore)
（1 行未修改）
|
||
| 2016-05-02 01:55 – 02:19 | r2894 – r2917 | |
顯示 diff（269 行未修改）
*資料欄位
*SENSOR_ID_DUST_PM25 （s_d0)
- *SENSOR_ID_TEMPERATURE (s_t2)
- *SENSOR_ID_HUMIDITY (s_h2)
*SENSOR_ID_DUST_PM10 （s_d1)
*SENSOR_ID_DUST_PM1 (s_d2)
+ *SENSOR_ID_TEMPERATURE (s_t2)
+ *SENSOR_ID_HUMIDITY (s_h2)
*SENSOR_ID_GAS_CO2 (s_g8) => 已新加入 spec
+ *Example:
+ *
+ *ver_format=3|FAKE_GPS=1|app=LASS4U|ver_app=beta|device_id=LASS-FT2_002|date=2016-05-02|time=02:11:20|device=Ameba|gps_lon=120.993378|gps_lat=24.8005658|s_t2=27.8|s_h2=70.6|s_d2=22.0|s_d0=32.0|s_d1=48.0|s_g8=530.0
*
LASS/Test/Ignore
（2 行未修改）
|
||
| 2016-04-14 21:30 – 21:40 | r2705 – r2893 | |
顯示 diff（20 行未修改）
*Code default APP_ID=1
+
+
+ *Next Free APP_ID by catagory
+ *
+ *
+
+
*
App Name(ID)
（225 行未修改）
*
LASS/Test/LASS4U
- *(APP_ID= APPID= APPTYPE_SYSTEM_BASE +2, APP_NAME=LASS4U)
+ *(APP_ID= APPTYPE_SYSTEM_BASE +2, APP_NAME=LASS4U)
負責人臉書: MingWei Cheng
*device="Ameba"
（14 行未修改）
*SENSOR_ID_GAS_CO2 (s_g8) => 已新加入 spec
*
+ LASS/Test/Ignore
+ *(APP_ID= APPTYPE_PUBLIC_BASE +13 [Just reserved, don't need to be use ], APP_NAME=Ignore)
+ *This is used for bring up new app_id, testing purpose. Anything that we can't make sure the format is correct, please send to this topic. This topic can access some mistake in the format and data.
|
||
| 2016-04-14 01:40 – 02:09 | r2633 – r2704 | |
顯示 diff（247 行未修改）
*QMQTT example:
*12:51:47|LASS/Test/Air-1/FT1_054|ver_format=3|FAKE_GPS=0|app=Air-1|ver_app=0.8.1|device_id=FT1_054|tick=678448|date=2016-02-14|time=04:51:46|device=LinkItONE|s_0=11.00|s_1=100.00|s_2=1.00|s_3=0.00|s_4=1.00|s_d0=3.00|s_t0=23.70|s_h0=71.70|s_d1=4.00|s_g0=0.99|s_g1=4.12|s_g2=0.14|s_g3=1000.04|s_g4=999.98|s_g5=2991.14|s_g6=1.09|s_g7=1.40|gps_lat=24.482250|gps_lon=120.596191|gps_fix=0|gps_num=0|gps_alt=135
+ *
+ LASS/Test/LASS4U
+ *(APP_ID= APPID= APPTYPE_SYSTEM_BASE +2, APP_NAME=LASS4U)
+ 負責人臉書: MingWei Cheng
+ *device="Ameba"
+
+ *可感測溫度/濕度(SHT31)，PM1, PM2.5/PM10, CO2
+
+ *感測器
+ *PMS3003(G3)
+ *SenseAir S8 CO2
+ *Sensiron SHT31 溫濕度
+ *
+ *資料欄位
+ *SENSOR_ID_DUST_PM25 （s_d0)
+ *SENSOR_ID_TEMPERATURE (s_t2)
+ *SENSOR_ID_HUMIDITY (s_h2)
+ *SENSOR_ID_DUST_PM10 （s_d1)
+ *SENSOR_ID_DUST_PM1 (s_d2)
+ *SENSOR_ID_GAS_CO2 (s_g8) => 已新加入 spec
+ *
|
||
| 2016-02-23 06:35 – 06:36 | r2629 – r2632 | |
顯示 diff（249 行未修改）
|
||
| 2016-02-21 00:12 – 00:14 | r2577 – r2628 | |
顯示 diff（189 行未修改）
*此 APP 為 Field Try + Grove - Multichannel Gas Sensor (接上 LinkItONE 之 Grove I2C 街頭)
+
+ *可感測溫度，濕度，PM2.5/PM10, 氣體 ( NH3, CO, NO2 )
*
*SENSOR_ID_DUST_PM25（s_d0)
（6 行未修改）
*SENSOR_ID_CO(dg1
*SENSOR_ID_NO2(dg2
- *SENSOR_ID_C3H8(dg3
+ *
+ * --- 以下氣體感測值可能很有問題 ---SENSOR_ID_C3H8(dg3
*SENSOR_ID_C4H10(dg4
*SENSOR_ID_CH4(dg5
（42 行未修改）
|
||
| 2016-02-14 04:46 – 04:52 | r2471 – r2576 | |
顯示 diff（186 行未修改）
LASS/Test/LinkAir-1PP_ID= APPTYPE_PUBLIC_BASE +11, A2P_NAME=LinkAir-1人臉書: 哈爸, ...
*LAvice="LinkItnkItONE
+
+
+ *此 APP 為 Field Try + Grove - Multichannel Gas Sensor (接上 LinkItONE 之 Grove I2C 街頭)
*
- *SENSOR_ID_DUST （s_d0)
+ *SENSOR_ID_DUST_PM25（s_d0)
*SENSOR_ID_TEMPERATURE (s_t0)
*SENSOR_ID_HUMIDITY (s_h0)
- *SENSOR_ID_NH3(g
+ *SENSOR_ID_DUST_PM10 （s_d1)
+ **SENSOR_ID_NH3(g
*SENSOR_ID_CO(dg1
（4 行未修改）
*SENSOR_ID_H2(dg6
*SENSOR_ID_C2H5OH(dg7*
+ *
+ *請參考 LASS 感測器驗證 - Grove - Multichannel Gas Sensor
+
+ *Console sample output
+ *-----Loop ID: 9, current tick= 558922 -----
+ *GPS raw data(GPRMC):$GPRMC,044946.012,V,2448.2250,N,12059.6191,E,0.000,0.00,140216,,,N*41
+ *GPS raw data(GPGGA):$GPGGA,044946.012,2448.2250,N,12059.6191,E,0,0,,135.0,M,15.0,M,,*47
+ *GPS raw data(GPVTG):$GPVTG,0.00,T,,M,0.000,N,0.000,K,N*32
+ *GPS detail result:
+ * UTC timer 4-49-46
+ * latitude = 2448.2250, longitude = 12059.6191
+ * altitude above mean sea level = 135 meters
+ *GPS RMC detail result: Date(DD/MM/YY):14/2/16
+ *GPS VTG detail result: Ground Speed:0.000000
+ *SensorValue(RecordID):9.00
+ *SensorValue(BatteryLevel):100.00
+ *SensorValue(BatteryCharging):1.00
+ *SensorValue(speed):0.00
+ *SensorValue(debugwifi):1.00
+ *[Performence TIME-COUNT]:59770
+ *[SENSOR-DUST-PM2.5]:3.00
+ *[SENSOR-DUST-PM10]:4.00
+ *SensorValue(Temperature):23.70
+ *SensorValue(Humidity):71.70
+ *The concentration of NH3 is 0.99 ppm
+ *The concentration of CO is 4.40 ppm
+ *The concentration of NO2 is 0.14 ppm
+ *The concentration of C3H8 is 1000.04 ppm
+ *The concentration of C4H10 is 999.98 ppm
+ *The concentration of CH4 is 2991.14 ppm
+ *The concentration of H2 is 1.09 ppm
+ *The concentration of C2H50H is 1.50 ppm
+ *CSV,0.99,4.40,0.14,1000.04,999.98,2991.14,1.09,1.50
+ *Pack MQTT Topic:LASS/Test/Air-1
+ *|ver_format=3|FAKE_GPS=0|app=Air-1|ver_app=0.8.1|device_id=FT1_054|tick=558922|date=2016-02-14|time=04:49:46|device=LinkItONE|s_0=9.00|s_1=100.00|s_2=1.00|s_3=0.00|s_4=1.00|s_d0=3.00|s_t0=23.70|s_h0=71.70|s_d1=4.00|s_g0=0.99|s_g1=4.40|s_g2=0.14|s_g3=1000.04|s_g4=999.98|s_g5=2991.14|s_g6=1.09|s_g7=1.50|gps_lat=24.482250|gps_lon=120.596191|gps_fix=0|gps_num=0|gps_alt=135
+ *MQTT Companion channel published...
+ *MQTT sending
+ *LED:Wifi and gps ready!
+ *QMQTT example:
+ *12:51:47|LASS/Test/Air-1/FT1_054|ver_format=3|FAKE_GPS=0|app=Air-1|ver_app=0.8.1|device_id=FT1_054|tick=678448|date=2016-02-14|time=04:51:46|device=LinkItONE|s_0=11.00|s_1=100.00|s_2=1.00|s_3=0.00|s_4=1.00|s_d0=3.00|s_t0=23.70|s_h0=71.70|s_d1=4.00|s_g0=0.99|s_g1=4.12|s_g2=0.14|s_g3=1000.04|s_g4=999.98|s_g5=2991.14|s_g6=1.09|s_g7=1.40|gps_lat=24.482250|gps_lon=120.596191|gps_fix=0|gps_num=0|gps_alt=135
|
||
| 2016-02-05 00:26 – 00:26 | r2444 – r2470 | |
顯示 diff（191 行未修改）
*SENSOR_ID_HUMIDITY (s_h0)
- *SENSOR_ID_NH3(d1)
+ *SENSOR_ID_NH3(g
- *SENSOR_ID_CO(d11)
- *SENSOR_ID_NO2(d12)
- *SENSOR_ID_C3H8(d13)
- *SENSOR_ID_C4H10(d14)
- *SENSOR_ID_CH4(d15)
- *SENSOR_ID_H2(d16)
- *SENSOR_ID_C2H5OH(d17)*
+ *SENSOR_ID_CO(dg1
+ *SENSOR_ID_NO2(dg2
+ *SENSOR_ID_C3H8(dg3
+ *SENSOR_ID_C4H10(dg4
+ *SENSOR_ID_CH4(dg5
+ *SENSOR_ID_H2(dg6
+ *SENSOR_ID_C2H5OH(dg7*
|
||
| 2016-02-04 11:31 – 11:43 | r2286 – r2443 | |
顯示 diff（184 行未修改）
g Example:
- LASS/Test/LinkItSmart7688-Test
- *(APP_ID= APPTYPE_PUBLIC_BASE +11, APP_NAME=LinkItSmart7688-Test)
- 負責人臉書: 哈爸, ...
- *LASS - LinkIt Smart 7688Duo
- *device="LinkItSmart7688Duo"
+ LASS/Test/LinkAir-1PP_ID= APPTYPE_PUBLIC_BASE +11, A2P_NAME=LinkAir-1人臉書: 哈爸, ...
+ *LAvice="LinkItnkItONE
*
+ *SENSOR_ID_DUST （s_d0)
+ *SENSOR_ID_TEMPERATURE (s_t0)
+ *SENSOR_ID_HUMIDITY (s_h0)
+
+ *SENSOR_ID_NH3(d1)
+
+ *SENSOR_ID_CO(d11)
+ *SENSOR_ID_NO2(d12)
+ *SENSOR_ID_C3H8(d13)
+ *SENSOR_ID_C4H10(d14)
+ *SENSOR_ID_CH4(d15)
+ *SENSOR_ID_H2(d16)
+ *SENSOR_ID_C2H5OH(d17)*
|
||
| 2016-02-04 11:31 | r2285 | |
顯示 diff（192 行未修改）
|
||
| 2016-02-04 11:31 – 11:31 | r2283 – r2284 | |
顯示 diff（183 行未修改）
*device="LinkItSmart7688Duo"s
g Example:
+
+ LASS/Test/LinkItSmart7688-Test
+ *(APP_ID= APPTYPE_PUBLIC_BASE +11, APP_NAME=LinkItSmart7688-Test)
+ 負責人臉書: 哈爸, ...
+ *LASS - LinkIt Smart 7688Duo
+ *device="LinkItSmart7688Duo"
+ *
|
||
| 2016-01-21 05:16 – 05:25 | r2240 – r2282 | |
顯示 diff（118 行未修改）
*SENSOR_ID_BAROMETER(s_b0)
*...
+ *資料範例參考
+ *
+ *Humidity (DHT22) (s_h)
+ *Temperature (DHT22) (s_t*)PM 1.0 (TSI standard)
+ *PM 2.5 (TSI standard)
+ *PM 10 (TSI standard)
+ *PM 1.0 (std. atmosphere)
+ *PM 2.5 (std. atmosphere)
+ *PM 10 (std. atmosphere)
+ *Humidity (DHT11)
+ *Temperature (DHT11)
+ *Wind Direction Average
+ *Wind Speed (1 Minute)
+ *Max Wind Speed (5 Minutes)
+ *Rainfall (1 Hour)
+ *Rainfall (24 Hour)
+ *Atmosphere Pressure
+ *Lux
+ *Visiable Light
+ *UV Index
+ *
LASS/Test/ArduSS*(APP_ID= APPTYPE_PUBLIC_BASE +36 APP_NAME=MArduSS
**Test 是目前的群組，後面跟 APP_NAME 一樣
（42 行未修改）
|
||
| 2015-12-28 22:35 – 22:36 | r2223 – r2239 | |
顯示 diff（159 行未修改）
LASS/Test/PMLinkItSmart7688-Test(APP_ID= APPTYPE_PUBLIC_BASE +10,1APP_NAME=PMLinkItSmart7688-Test負責人臉書:
- * 哈爸, ... SeLASS - LinkIt Smart 7688Duos
+ * 哈爸, ... SeLASS - LinkIt Smart 7688Duo
+ *device="LinkItSmart7688Duo"s
g Example:
|
||
| 2015-12-26 05:48 – 05:50 | r2179 – r2222 | |
顯示 diff（156 行未修改）
|veLASS/Test/PM25LCleaner*(APP_ID= APPTYPE_PUBLIC_BASE +91 APP_NAME=PM25LCleaner
負責人臉書：:
- *Sensors Specification - Pm25CleanerMsg Example:
+ 顏小華*Sensors Specification - Pm25CleanerMsg Example:
+
+ LASS/Test/PMLinkItSmart7688-Test(APP_ID= APPTYPE_PUBLIC_BASE +10,1APP_NAME=PMLinkItSmart7688-Test負責人臉書:
+ * 哈爸, ... SeLASS - LinkIt Smart 7688Duos
+ g Example:
|
||
| 2015-12-25 11:38 – 11:45 | r2131 – r2178 | |
顯示 diff（152 行未修改）
- LASS/Test/Pm2東成APP_ID= APPTYPE_PUBLIC_BASE +8, 9PP_NAME=Pm2PM25LNT7688責人臉書：哈爸
+ LASS/Test/Pm2PM25LNT7688APP_ID= APPTYPE_PUBLIC_BASE +8, 9PP_NAME=Pm2PM25LNT7688責人臉書：哈爸
東成v*APP_NAME 隨意改g Example:
- |ve
+ |veLASS/Test/PM25LCleaner*(APP_ID= APPTYPE_PUBLIC_BASE +91 APP_NAME=PM25LCleaner
+ 負責人臉書：:
+ *Sensors Specification - Pm25CleanerMsg Example:
|
||
| 2015-12-15 09:05 – 09:07 | r2102 – r2130 | |
顯示 diff（152 行未修改）
- LASS/Test/Pm2東成APP_ID= APPTYPE_PUBLIC_BASE +8, 9PP_NAME=Pm2東成責人臉書：哈爸
+ LASS/Test/Pm2東成APP_ID= APPTYPE_PUBLIC_BASE +8, 9PP_NAME=Pm2PM25LNT7688責人臉書：哈爸
東成v*APP_NAME 隨意改g Example:
|ve
|
||
| 2015-12-15 06:30 – 06:30 | r2089 – r2101 | |
顯示 diff（153 行未修改）
LASS/Test/Pm2東成APP_ID= APPTYPE_PUBLIC_BASE +8, 9PP_NAME=Pm2東成責人臉書：哈爸
- 東成vg Example:
+ 東成v*APP_NAME 隨意改g Example:
|ve
|
||
| 2015-12-15 04:53 – 04:54 | r2087 – r2088 | |
顯示 diff（153 行未修改）
LASS/Test/Pm2東成APP_ID= APPTYPE_PUBLIC_BASE +8, 9PP_NAME=Pm2東成責人臉書：哈爸
- vg Example:
+ 東成vg Example:
|ve
|
||
| 2015-12-15 03:11 – 03:12 | r2068 – r2086 | |
顯示 diff（150 行未修改）
*Sensors Specification - Pm25Ameba
+
+
+ LASS/Test/Pm2東成APP_ID= APPTYPE_PUBLIC_BASE +8, 9PP_NAME=Pm2東成責人臉書：哈爸
+ vg Example:
+ |ve
|
||
| 2015-12-12 00:35 – 00:36 | r2065 – r2067 | |
顯示 diff（152 行未修改）
|
||
| 2015-12-12 00:35 – 00:35 | r2062 – r2064 | |
顯示 diff（135 行未修改）
LASS/Test/ArduSRaspPm25P_ID= APPTYPE_PUBLIC_BASE +6, AP7_NAME=ArduSRaspPm25st 這個保留給蕭大APP_NAME 一樣
*Sen, 請參考別的 APP_ID 撰寫s*負責人臉書：[ 蕭漢威]
- oSensors Specification - ABC
+ oSensors Specification - RaspPm25
LASS/Test/Pm25Ameba
（12 行未修改）
|
||
| 2015-12-12 00:29 – 00:35 | r2031 – r2061 | |
顯示 diff（133 行未修改）
*2. 資料時間。由於是 offline , 感測時間與上傳時間不同，注意想關相關問題
- LASS/Test/ArduSABCP_ID= APPTYPE_PUBLIC_BASE +6, AP7_NAME=ArduSABCst 這個保留給蕭大APP_NAME 一樣
- *Sen, 請參考別的 APP_ID 撰寫s*負責人臉書：[ 請自入 ]
+ LASS/Test/ArduSRaspPm25P_ID= APPTYPE_PUBLIC_BASE +6, AP7_NAME=ArduSRaspPm25st 這個保留給蕭大APP_NAME 一樣
+ *Sen, 請參考別的 APP_ID 撰寫s*負責人臉書：[ 蕭漢威]
oSensors Specification - ABC
（13 行未修改）
|
||
| 2015-12-11 21:50 – 23:07 | r1790 – r2030 | |
顯示 diff- LASS - App List and Sensor information
- The app name identify the your application. We suggest you can define it and describe it here. If possible, please list the sensor value definition in your records. Everyone can get the sensor technical specification. Suggest you describe your sensors specification by copy from the template
-
- Sensors Specification - Template
+ LASS - App Lists
+ The app name identify the your application. We suggest you can define it and describe it here. If possible, please list the sensor value definition in your records. Everyone can get the sensor technical specification. Suggest you reference current sensors specification : LASS - Sensors data specification
Application type
（16 行未修改）
*Code default APP_ID=1
-
- Sensors Specification - Default
*
App Name(ID)
（12 行未修改）
LASS/Test/PM25(
*APPID= APPTYPE_SYSTEM_BASE +1), APP_NAME=PM25
- **
+ *
+ 負責人臉書：[ 請自入 ]
Sensor data definition
*0-9 : system sensor
（1 行未修改）
*ENSOR_ID_DUST （s_d0) *ENSOR_ID_TEMPERATURE 1(s_t0) *ENSOR_ID_HUMIDITY 1(s_h0)
+ *Sensors Specification - PM25
*LASS/Test/PM25 |ver_format=3|fmt_opt=0|app=PM25|ver_app=0.7.6|device_id=FT1_007|tick=582358|date=2080-01-06|time=00:09:21|device=LinkItONE|s_0=54.00|s_1=100.00|s_2=1.00|s_3=0.00|s_d0=12.00|s_t0=27.90|s_h0=54.50|gps_lat=24.480128|gps_lon=120.595609|gps_fix=0|gps_num=0|gps_alt=13
LASS/Test/Wuulong(A
*PP_ID= APPTYPE_PUBLIC_BASE +1)
, APP_NAME=Wuulong*
- *Sensor data definition
+ *負責人臉書：哈爸Sensor data definition
*0-9 : system sensor
*10 : 空氣微粒子數 Grove-Dust Sensor
（17 行未修改）
*PPID= APPTYPE_PUBLIC_BASE +2)
, APP_NAME=EXAMPLE_APP1
- *Sensor data definition
+ **負責人臉書：[ 請自入 ]
+ Sensor data definition
*0-9 : system sensor
*10 : 空氣微粒子數 Grove-Dust Sensor
- *LASS/Test/MAPS(A
+
+ *Sensors Specification - EXAMPLE_APP1*LASS/Test/MAPS(A
*PP_ID= APPTYPE_PUBLIC_BASE +3
- *, APP_NAME=MAPSSensor data definition
+ *, APP_NAME=MAPSSe*負責人臉書：[ 請自入 ]
+ nsor data definition
*
-9 : system sensor
（14 行未修改）
LASS/Test/FlyPm25
*(APP_ID= APPTYPE_PUBLIC_BASE +4, APP_NAME=FlyPm25)
+ *負責人臉書：[ 請自入 ]
*Sensor data definition
*0-9 : system sensor
（4 行未修改）
*SENSOR_ID_BAROMETER(s_b)
- *
+ **Sensors Specification - FlyPm25
LASS/Test/Farm
*(APP_ID= APPTYPE_PUBLIC_BASE +5, APP_NAME=Farm)
+ *負責人臉書：[ 請自入 ]
*Sensor data definition
*0-9 : system sensor
（6 行未修改）
LASS/Test/ArduSS*(APP_ID= APPTYPE_PUBLIC_BASE +36 APP_NAME=MArduSS
**Test 是目前的群組，後面跟 APP_NAME 一樣
+ *負責人臉書：[ 請自入 ]
Sensor data definition
*
（3 行未修改）
*312d(s_d0)ust sensor :G3
*4xGPS
- * *-OPT=1, a沒有網路上傳，使用 Offline import
+ * *-OPSensors Specification - ArduSST=1, a沒有網路上傳，使用 Offline import
*Offline 上傳注意事項
*1. GPS 位置資訊，能寫死提供最好
（1 行未修改）
LASS/Test/ArduSABCP_ID= APPTYPE_PUBLIC_BASE +6, AP7_NAME=ArduSABCst 這個保留給蕭大APP_NAME 一樣
- *Sen, 請參考別的 APP_ID 撰寫so
+ *Sen, 請參考別的 APP_ID 撰寫s*負責人臉書：[ 請自入 ]
+ oSensors Specification - ABC
+
+ LASS/Test/Pm25Ameba
+ *(APP_ID= APPTYPE_PUBLIC_BASE +8, APP_NAME=Pm25Ameba)
+ 負責人臉書：哈爸
+ device=Ameba
+
+ xx: CO:
+ t溫,h濕: 度，
+ 力bx: , G: 3 sensor
+ Msg
+ Example:
+ |ver_format=3|fmt_opt=0|app=PM25|ver_app=0.7.3|device_id=LJ_PM25_001|tick=26795810|date=2015-10-15|time=22:35:07|device=LinkItONE|s_0=2234.00|s_1=100.00|s_2=1.00|s_3=0.00|s_d0=39.00|s_t0=25.50|s_h0=65.80|gps_lat=25.025362|gps_lon=121.371038|gps_fix=1|gps_num=9|gps_alt=2
+
+ *Sensors Specification - Pm25Ameba
|
||
| 2015-12-10 23:08 | r1789 | |
顯示 diff（133 行未修改）
|
||
| 2015-12-10 23:06 – 23:08 | r1757 – r1788 | |
顯示 diff（128 行未修改）
*1. GPS 位置資訊，能寫死提供最好
*2. 資料時間。由於是 offline , 感測時間與上傳時間不同，注意想關相關問題
+
+ LASS/Test/ArduSABCP_ID= APPTYPE_PUBLIC_BASE +6, AP7_NAME=ArduSABCst 這個保留給蕭大APP_NAME 一樣
+ *Sen, 請參考別的 APP_ID 撰寫so
|
||
| 2015-12-09 22:06 – 22:07 | r1711 – r1756 | |
顯示 diff（119 行未修改）
Sensor data definition
*
- : battery level*
- *1: temperature Grove - Temperature and Humidity Sensor Pro
- *2: humidity Grove - Temperature and Humidity Sensor Pro
- *3:dust sensor :G3
- *4:GPS
- * *-9, 除非你有，要不然不用提供11:_OPT=1, a沒有網路上傳，使用 Offline import
+ 1(s_1) battery level*
+ *1:(s_t0) temperature Grove - Temperature and Humidity Sensor Pro
+ *211(s_h )humidity Grove - Temperature and Humidity Sensor Pro
+ *312d(s_d0)ust sensor :G3
+ *4xGPS
+ * *-OPT=1, a沒有網路上傳，使用 Offline import
*Offline 上傳注意事項
*1. GPS 位置資訊，能寫死提供最好
（1 行未修改）
|
||
| 2015-12-09 15:34 – 15:40 | r1640 – r1710 | |
顯示 diff（115 行未修改）
*SENSOR_ID_BAROMETER(s_b0)
*...
- LASS/Test/Arduino-PM2 *(APP_ID= APPTYPE_PUBLIC_BASE +36 APP_NAME=MArduSS
+ LASS/Test/ArduSS*(APP_ID= APPTYPE_PUBLIC_BASE +36 APP_NAME=MArduSS
**Test 是目前的群組，後面跟 APP_NAME 一樣
Sensor data definition
- *0-9 : system sensor
-
- **-9, 除非你有，要不然不用提供11: 溫度 Grove - Temperature and Humidity Sensor Pro
- *12:1濕度 Grove - Temperature and Humidity Sensor Pro
- *1FMT_OPT=1, a沒有網路上傳，使用 Offline import
+ *
+ : battery level*
+ *1: temperature Grove - Temperature and Humidity Sensor Pro
+ *2: humidity Grove - Temperature and Humidity Sensor Pro
+ *3:dust sensor :G3
+ *4:GPS
+ * *-9, 除非你有，要不然不用提供11:_OPT=1, a沒有網路上傳，使用 Offline import
*Offline 上傳注意事項
*1. GPS 位置資訊，能寫死提供最好
（1 行未修改）
|
||
| 2015-12-09 15:20 – 15:29 | r1558 – r1639 | |
顯示 diff（115 行未修改）
*SENSOR_ID_BAROMETER(s_b0)
*...
- LASS/Arduino base/PM2 *(APP_ID= APPTYPE_PUBLIC_BASE +36 APP_NAME=MArduSS
- *Sensor data definition
+ LASS/Test/Arduino-PM2 *(APP_ID= APPTYPE_PUBLIC_BASE +36 APP_NAME=MArduSS
+ **Test 是目前的群組，後面跟 APP_NAME 一樣
+ Sensor data definition
*0-9 : system sensor
- *11: 溫度 Grove - Temperature and Humidity Sensor Pro
+
+ **-9, 除非你有，要不然不用提供11: 溫度 Grove - Temperature and Humidity Sensor Pro
*12:1濕度 Grove - Temperature and Humidity Sensor Pro
- *1
+ *1FMT_OPT=1, a沒有網路上傳，使用 Offline import
+ *Offline 上傳注意事項
+ *1. GPS 位置資訊，能寫死提供最好
+ *2. 資料時間。由於是 offline , 感測時間與上傳時間不同，注意想關相關問題
|
||
| 2015-12-09 15:10 – 15:19 | r1492 – r1557 | |
顯示 diff（115 行未修改）
*SENSOR_ID_BAROMETER(s_b0)
*...
+ LASS/Arduino base/PM2 *(APP_ID= APPTYPE_PUBLIC_BASE +36 APP_NAME=MArduSS
+ *Sensor data definition
+ *0-9 : system sensor
+ *11: 溫度 Grove - Temperature and Humidity Sensor Pro
+ *12:1濕度 Grove - Temperature and Humidity Sensor Pro
+ *1
|
||
| 2015-12-07 02:35 – 02:36 | r1473 – r1491 | |
顯示 diff（104 行未修改）
*SENSOR_ID_BAROMETER(s_b)
- *L
+ *
+ LASS/Test/Farm
+ *(APP_ID= APPTYPE_PUBLIC_BASE +5, APP_NAME=Farm)
+ *Sensor data definition
+ *0-9 : system sensor
+
+ *SENSOR_ID_DUST （s_d0)
+ *SENSOR_ID_TEMPERATURE (s_t0)
+ *SENSOR_ID_HUMIDITY (s_h0)
+ *SENSOR_ID_BAROMETER(s_b0)
+ *...
|
||
| 2015-12-06 06:16 – 06:21 | r1418 – r1472 | |
顯示 diff（89 行未修改）
LASS-MAPS-LJ|tick=24792770|date=30/9/15|time=11:49:12|device=LinkItONE|values=2188.00,100.00,1.00,0.14,0.00,0.00,0.00,0.00,0.00,0.00,1008.65,28.10,99.90,0.00,0.00,0.00,0.00,0.00,0.00,0.00|gps=$GPGGA,114912.000,2502.1610,N,12136.9598,E,0,0,,239.6,M,15.3,M,,*4D\r
gps_x=25.036016666666665,gps_y=121.61599666666669,gps_z=239.6
- L
L
+
+
+
+
+ LASS/Test/FlyPm25
+ *(APP_ID= APPTYPE_PUBLIC_BASE +4, APP_NAME=FlyPm25)
+ *Sensor data definition
+ *0-9 : system sensor
+
+ *SENSOR_ID_DUST （s_d0)
+ *SENSOR_ID_TEMPERATURE (s_t0)
+ *SENSOR_ID_HUMIDITY (s_h0)
+ *SENSOR_ID_BAROMETER(s_b)
+
+ *L
|
||
| 2015-11-01 00:54 – 01:07 | r1271 – r1417 | |
顯示 diff（15 行未修改）
APP_ID Rule
*Each application should have unique APP_ID. The app name is the identification from the system view. APP_ID is the developer's skill to organize it.
- *
- *0-255: System application
- *256-32767: public application
- *32768-65536: private application
+
+
+ *0-255: System application (APPTYPE_SYSTEM_BASE=)
+ *256-32767: public application( APPTYPE_PUBLIC_BASE)=256
+ *32768-65536: private application( APPTYPE_PRIVATE_BASE)=32768
*Code default APP_ID=1
- App Name(ID):
- LASS/Test/Default(APP_ID=1)
+ Sensors Specification - Default
+ *
+ App Name(ID)
+
+
+ LASS/Test/Default(APP_ID=)
*Sensor data definition
*0-9 : system sensor
（4 行未修改）
*SENSOR_ID_GROUNDSPEED 3
*
- *10 : 空氣微粒子數 Grove-Dust Sensor
+ *S
+ LASS/Test/PM25(
+ *APPID= APPTYPE_SYSTEM_BASE +1), APP_NAME=PM25
+ **
+ Sensor data definition
+ *0-9 : system sensor
- *Sensors Specification - Default
- *
- LASS/Test/Wuulong(APP_ID=256+1)
- *
+ *ENSOR_ID_DUST （s_d0) *ENSOR_ID_TEMPERATURE 1(s_t0) *ENSOR_ID_HUMIDITY 1(s_h0)
+
+ *LASS/Test/PM25 |ver_format=3|fmt_opt=0|app=PM25|ver_app=0.7.6|device_id=FT1_007|tick=582358|date=2080-01-06|time=00:09:21|device=LinkItONE|s_0=54.00|s_1=100.00|s_2=1.00|s_3=0.00|s_d0=12.00|s_t0=27.90|s_h0=54.50|gps_lat=24.480128|gps_lon=120.595609|gps_fix=0|gps_num=0|gps_alt=13
+ LASS/Test/Wuulong(A
+ *PP_ID= APPTYPE_PUBLIC_BASE +1)
+ , APP_NAME=Wuulong*
*Sensor data definition
*0-9 : system sensor
（8 行未修改）
*SENSOR_ID_UV_BLYNK 5
*SENSOR_ID_SOUND_BLYNK 6
-
*Sensors Specification - Wuulong
- Example:
+
+ xample:
16:40:23|LASS/Test/Wuulong|ver_format=1|fmt_opt=0|app=Wuulong|ver_app=0.6.6|device_id=LASS-Hello1|tick=1299557|date=6/1/80|time=0:21:18|device=LinkItONE|values=39.00,100.00,1.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.62,2822.51,41.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00|gps=$GPGGA,002118.978,2448.0017,N,12059.5477,E,0,0,,135.0,M,15.0,M,,*4E\r
gps_x=24.80002833333333,gps_y=120.99246166666664,gps_z=135.0
-
- LASS/Test/EXAMPLE_APP1(APPID=256+2)
- LASS/Test/MAPS(APP_ID=256+3
+ LASS/Test/EXAMPLE_APP1(A
+ *PPID= APPTYPE_PUBLIC_BASE +2)
+ , APP_NAME=EXAMPLE_APP1
*Sensor data definition
+ *0-9 : system sensor
+ *10 : 空氣微粒子數 Grove-Dust Sensor
+ *LASS/Test/MAPS(A
+ *PP_ID= APPTYPE_PUBLIC_BASE +3
+ *, APP_NAME=MAPSSensor data definition
*
-9 : system sensor
*1
- : 氣壓 Grove - Barometer (High-Accuracy)
+ 10 : 氣壓 Grove - Barometer (High-Accuracy)
*11 : 溫度 Grove - Temperature and Humidity Sensor Pro
*12: 濕度 Grove - Temperature and Humidity Sensor Pro
*13: 光度 Grove - Digital Light Sensor
-
- *Sensors Specification - MAPS
+ Sensors Specification - MAPS
example: (This capture from lass.py )
LASS-MAPS-LJ|tick=24792770|date=30/9/15|time=11:49:12|device=LinkItONE|values=2188.00,100.00,1.00,0.14,0.00,0.00,0.00,0.00,0.00,0.00,1008.65,28.10,99.90,0.00,0.00,0.00,0.00,0.00,0.00,0.00|gps=$GPGGA,114912.000,2502.1610,N,12136.9598,E,0,0,,239.6,M,15.3,M,,*4D\r
gps_x=25.036016666666665,gps_y=121.61599666666669,gps_z=239.6
L
- LASS/Test/PM25(APPID=256+4)
- *should we make PM25 a system APP? We can do it after updating APP_ID of MAPS and EXAMPLE_APPX?
- *Yes, PM2.5 to APP_ID=1A
+ L
|
||
| 2015-10-16 23:50 – 23:51 | r1228 – r1270 | |
顯示 diff（75 行未修改）
L
LASS/Test/PM25(APPID=256+4)
- *should we make PM25 a system APP? We can do it after updating APP_ID of MAPS and EXAMPLE_APPX?A
+ *should we make PM25 a system APP? We can do it after updating APP_ID of MAPS and EXAMPLE_APPX?
+ *Yes, PM2.5 to APP_ID=1A
|
||
| 2015-10-16 22:54 – 22:56 | r1152 – r1227 | |
顯示 diff（74 行未修改）
gps_x=25.036016666666665,gps_y=121.61599666666669,gps_z=239.6
L
- LASS/Test/PM25(APPID=256+4)A
+ LASS/Test/PM25(APPID=256+4)
+ *should we make PM25 a system APP? We can do it after updating APP_ID of MAPS and EXAMPLE_APPX?A
|
||
| 2015-10-16 21:56 – 21:57 | r1134 – r1151 | |
顯示 diff（57 行未修改）
gps_x=24.80002833333333,gps_y=120.99246166666664,gps_z=135.0
+ LASS/Test/EXAMPLE_APP1(APPID=256+2)
- LASS/Test/MAPS(APP_ID=256+2
+ LASS/Test/MAPS(APP_ID=256+3
*Sensor data definition
*
（9 行未修改）
LASS-MAPS-LJ|tick=24792770|date=30/9/15|time=11:49:12|device=LinkItONE|values=2188.00,100.00,1.00,0.14,0.00,0.00,0.00,0.00,0.00,0.00,1008.65,28.10,99.90,0.00,0.00,0.00,0.00,0.00,0.00,0.00|gps=$GPGGA,114912.000,2502.1610,N,12136.9598,E,0,0,,239.6,M,15.3,M,,*4D\r
gps_x=25.036016666666665,gps_y=121.61599666666669,gps_z=239.6
- LASS/Test/
- xxx(APPID=256+23
+ L
+ LASS/Test/PM25(APPID=256+4)A
|
||
| 2015-10-09 23:31 – 23:33 | r1102 – r1133 | |
顯示 diff（26 行未修改）
*Sensor data definition
*0-9 : system sensor
+
+ *SENSOR_ID_RECORDID 0
+ *SENSOR_ID_BATTERYLEVEL 1
+ *SENSOR_ID_BATTERYCHARGING 2 // battery is charging: (0) not charging, (1) charging
+ *SENSOR_ID_GROUNDSPEED 3
+ *
*10 : 空氣微粒子數 Grove-Dust Sensor
（8 行未修改）
*12 : 聲音 Grove-Sound Sensor
*
+ *Blynk Virtual Sensor
+ *Same as system sensor
+ *
+ *SENSOR_ID_DUST_BLYNK 4
+ *SENSOR_ID_UV_BLYNK 5
+ *SENSOR_ID_SOUND_BLYNK 6
+
+
*Sensors Specification - Wuulong
Example:
（20 行未修改）
|
||
| 2015-10-07 03:02 – 03:39 | r574 – r1101 | |
顯示 diff（2 行未修改）
Sensors Specification - Template
+
+ Application type
+ System application
+ *These application reserved for LASS system purpose. For example, default LASS package.
+ *
+ Public application
+ *The application intense to share the design and data to public. The sensor spec and all information will be asked to provided in order to help others to re-produce and share the data
+ *
+ Private application
+ *The application is private and self organised.
+ *
+ APP_ID Rule
+ *Each application should have unique APP_ID. The app name is the identification from the system view. APP_ID is the developer's skill to organize it.
+ *
+ *0-255: System application
+ *256-32767: public application
+ *32768-65536: private application
+
+ *Code default APP_ID=1
App Name(ID):
- LASS/Test/Default(APPID=1)
+ LASS/Test/Default(APP_ID=1)
*Sensor data definition
*0-9 : system sensor
（2 行未修改）
*Sensors Specification - Default
*
- LASS/Test/Wuulong
+ LASS/Test/Wuulong(APP_ID=256+1)
*
*Sensor data definition
（9 行未修改）
- LASS/Test/MAPS(APPID=2)
+ LASS/Test/MAPS(APP_ID=256+2
*Sensor data definition
*
（10 行未修改）
gps_x=25.036016666666665,gps_y=121.61599666666669,gps_z=239.6
LASS/Test/
+ xxx(APPID=256+23
|
||
| 2015-10-07 03:02 | r573 | |
顯示 diff（42 行未修改）
|
||
| 2015-10-07 03:02 – 03:02 | r550 – r572 | |
顯示 diff（3 行未修改）
Sensors Specification - Template
- App Name:
- LASS/Test/Default
+ App Name(ID):
+ LASS/Test/Default(APPID=1)
*Sensor data definition
*0-9 : system sensor
（16 行未修改）
- LASS/Test/MAPS
+ LASS/Test/MAPS(APPID=2)
*Sensor data definition
*
（9 行未修改）
LASS-MAPS-LJ|tick=24792770|date=30/9/15|time=11:49:12|device=LinkItONE|values=2188.00,100.00,1.00,0.14,0.00,0.00,0.00,0.00,0.00,0.00,1008.65,28.10,99.90,0.00,0.00,0.00,0.00,0.00,0.00,0.00|gps=$GPGGA,114912.000,2502.1610,N,12136.9598,E,0,0,,239.6,M,15.3,M,,*4D\r
gps_x=25.036016666666665,gps_y=121.61599666666669,gps_z=239.6
+ LASS/Test/
|
||
| 2015-09-30 11:49 – 11:56 | r335 – r549 | |
顯示 diff- LASS - Sensor App List
- The app name identify the your application. We suggest you can define it and describe it here. If possible, please list the sensors you use. Everyone can get the sensor technical specification
+ LASS - App List and Sensor information
+ The app name identify the your application. We suggest you can define it and describe it here. If possible, please list the sensor value definition in your records. Everyone can get the sensor technical specification. Suggest you describe your sensors specification by copy from the template
+
+ Sensors Specification - Template
App Name:
+ LASS/Test/Default
+ *Sensor data definition
+ *0-9 : system sensor
+ *10 : 空氣微粒子數 Grove-Dust Sensor
+
+ *Sensors Specification - Default
+ *
LASS/Test/Wuulong
+ *
*Sensor data definition
*0-9 : system sensor
（1 行未修改）
*11 : UV 紫外線 Grove-UV Sensor
*12 : 聲音 Grove-Sound Sensor
- Example:
+ *
+ *Sensors Specification - Wuulong
+ Example:
16:40:23|LASS/Test/Wuulong|ver_format=1|fmt_opt=0|app=Wuulong|ver_app=0.6.6|device_id=LASS-Hello1|tick=1299557|date=6/1/80|time=0:21:18|device=LinkItONE|values=39.00,100.00,1.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.62,2822.51,41.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00|gps=$GPGGA,002118.978,2448.0017,N,12059.5477,E,0,0,,135.0,M,15.0,M,,*4E\r
gps_x=24.80002833333333,gps_y=120.99246166666664,gps_z=135.0
+
LASS/Test/MAPS
（7 行未修改）
*13: 光度 Grove - Digital Light Sensor
+ *Sensors Specification - MAPS
example: (This capture from lass.py )
- 16:23:59|LASS/Test/MAPS|ver_format=1|fmt_opt=0|app=MAPS|ver_app=0.6.6|device_id=LASS-MAPS-LJ|tick=263861|date=29/9/15|time=8:23:32|device=LinkItONE|values=20.00,100.00,1.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,1001.90,28.70,91.40,96.00,0.00,0.00,0.00|gps=$GPGGA,082332.086,8960.0000,N,00000.0000,E,0,0,,137.0,M,13.0,M,,*45\r
- gps_x=89.99999999999999,gps_y=0.0,gps_z=137.0
+ LASS-MAPS-LJ|tick=24792770|date=30/9/15|time=11:49:12|device=LinkItONE|values=2188.00,100.00,1.00,0.14,0.00,0.00,0.00,0.00,0.00,0.00,1008.65,28.10,99.90,0.00,0.00,0.00,0.00,0.00,0.00,0.00|gps=$GPGGA,114912.000,2502.1610,N,12136.9598,E,0,0,,239.6,M,15.3,M,,*4D\r
+ gps_x=25.036016666666665,gps_y=121.61599666666669,gps_z=239.6
|
||
| 2015-09-29 12:29 – 12:31 | r324 – r334 | |
顯示 diff（17 行未修改）
-9 : system sensor
*1
- : 氣壓
- *11 : 溫度
- *12: 濕度
- *13: 光度（室內）
+ : 氣壓 Grove - Barometer (High-Accuracy)
+ *11 : 溫度 Grove - Temperature and Humidity Sensor Pro
+ *12: 濕度 Grove - Temperature and Humidity Sensor Pro
+ *13: 光度 Grove - Digital Light Sensor
example: (This capture from lass.py )
（2 行未修改）
|
||
| 2015-09-29 08:31 – 08:43 | r10 – r323 | |
顯示 diff LASS - Sensor App List
+ The app name identify the your application. We suggest you can define it and describe it here. If possible, please list the sensors you use. Everyone can get the sensor technical specification
App Name:
+ LASS/Test/Wuulong
+ *Sensor data definition
+ *0-9 : system sensor
+ *10 : 空氣微粒子數 Grove-Dust Sensor
+ *11 : UV 紫外線 Grove-UV Sensor
+ *12 : 聲音 Grove-Sound Sensor
+ Example:
+ 16:40:23|LASS/Test/Wuulong|ver_format=1|fmt_opt=0|app=Wuulong|ver_app=0.6.6|device_id=LASS-Hello1|tick=1299557|date=6/1/80|time=0:21:18|device=LinkItONE|values=39.00,100.00,1.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.62,2822.51,41.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00|gps=$GPGGA,002118.978,2448.0017,N,12059.5477,E,0,0,,135.0,M,15.0,M,,*4E\r
+ gps_x=24.80002833333333,gps_y=120.99246166666664,gps_z=135.0
LASS/Test/MAPS
+ *Sensor data definition
+ *
+ -9 : system sensor
+ *1
+ : 氣壓
+ *11 : 溫度
+ *12: 濕度
+ *13: 光度（室內）
+
+ example: (This capture from lass.py )
+ 16:23:59|LASS/Test/MAPS|ver_format=1|fmt_opt=0|app=MAPS|ver_app=0.6.6|device_id=LASS-MAPS-LJ|tick=263861|date=29/9/15|time=8:23:32|device=LinkItONE|values=20.00,100.00,1.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,0.00,1001.90,28.70,91.40,96.00,0.00,0.00,0.00|gps=$GPGGA,082332.086,8960.0000,N,00000.0000,E,0,0,,137.0,M,13.0,M,,*45\r
+ gps_x=89.99999999999999,gps_y=0.0,gps_z=137.0
|
||
| 2015-09-29 08:31 | r9 | |
顯示 diff（5 行未修改）
|
||
| 2015-09-29 08:31 – 08:31 | r3 – r8 | |
顯示 diff LASS - Sensor App List
- A
+ App Name:
+
+ LASS/Test/MAPS
|
||
| 2015-09-29 08:31 | r2 | |
顯示 diff（3 行未修改）
|
||
| 2015-09-29 08:31 | r1 | |
顯示 diff LASS - Sensor App List
+
+ A
|
||
| 2015-09-29 08:30 | r0 | |
顯示 diff-
+ LASS - Sensor App List
|
||